Bostitch stapler MIIIFS (15.5 ga)
Primatech stapler 250ASR (15.5 ga)
Lagler Hummel Belt Sander 8''
The HUMMEL belt sanding machine is the best-known floor sanding machine in the world, with thousands of models in use across the globe. Mature, long-life technology for perfect sanding quality and enormous machine power have made it the undisputed number one system for parquet floor finishing for decades. The combination of an aggressive sanding drum, three-stage drum pressure regulation and belt tensioning device with integrated automatically regulated belt guidance guarantees quick work and optimum sanding quality.
HUMMEL facts: extremely economical, belt can be changed in seconds, impressive working quality, fail-safe and sturdy design, optimised dust extraction and low-fatigue work.
Ideal use: Perfect and economical sanding of both small and large areas, even in critical areas such as mosaic inlays with soft wood.
Special areas of application: plastic ice skating rinks, tartan sport surfaces, rubber granulate surfaces.
Bona Belt Sander
The Bona Belt's innovations include a compact chassis for easy manoeuvring with increased power efficiency with the new Poly-V drive belt. Special transport wheels provide protection and convenience during transportation. Available as an 8" or 10" belt sander, the Bona Belt is Atomic DCS compatible.
Motor (single phase): 4 HP, 60 Hz, 230 Volt, Thermal Overload Protection
Machine Weight 10": 182.5 lbs.; 8":175 lbs
Sanding Drum Speed: 2,300 RPM
Sanding Drum Width: 8" or 10"
Abrasive Sleeve Size: 7-7/8" x 29-1/2" or 9-7/8" x 29-1/2"
Dimensions: 37-4/5"L x 14-1/5"W x 39-1/3"H
On-Line Digital Volt Meter
30 Amp 230 Volt Twist Lock Connect
FloorCrafter Belt Sander
The FloorCrafter upholds a long tradition of providing precision instruments to a craftsman’s trade. The FloorCrafter, engineered to be the most aggressive belt machine in the industry, was also designed to provide reduced vibration. Its cutting ability allows the hardwood sanding professional the ability to increase production while achieving perfect results. With the patented Dolly Transport system, the FloorCrafter is truly a unique and innovative approach to hardwood floor sanding.
Precision balanced drum with machined spiral cooling slots.
Patented one-tool leveling adjustment.
Recessed drum door provides better air seal and eases abrasive installation and adjustments.
Patented Dolly Transport System eases transport to and from job sites.
Exclusive “feathering” drum lowering handle eases operation.
Exclusive split rear caster for smooth forward/reverse transitions.
The LAGLER UNICO is the ideal sanding machine for sanding all edge areas without shoulders with ergonometrically perfect design: With individually adjustable guide handle, and optimally positioned handle in the area of the sanding disc.
Single-phase motor: 125V / 1.2 kw
No voltage release
Thermal overload protection
Fuse protection: 10 Amperes
Sanding disc diameter: 178 mm / 7 inch
Sanding disc speed: approx. 2,800 rpm
Weight: 44 lbs
Dust Bag, Multi-Clip fastener for Dust Bag, Model 230 9" Attachment
Velcro Strip for Attachment, Standard Cable Length is 35 feet, Cable Rod, O-ring as strain relief device, Allen key, Protective Mask, Operating Instructions
Attachement 105: 4 1/8''
Attachement 350: 13 3/4''
The ELAN is the light and flexible universal machine popular with both professionals and rental companies.
With its low machine weight and extraordinary manoeuvrability, the ELAN is not only extremely suitable for sanding edges and areas of wooden flooring underneath radiators, but for wooden staircases as well.
A sturdy motor and good dust extraction guarantee clean work. The ELAN is straightforward to use, making it suitable for finishing and cover- up work. Irregularities in the flooring are levelled out smoothly thanks to the flexible steel sanding plate. A choice of 2 straight attachments and 1 attachment for corner sanding are available.
Ideal use: For the perfect sanding - without shoulders - of edges and corner areas and stairs. Perfect for DIY enthusiasts.
The Lagler Flip Edger has maximum efficiency for perfect, comfortable sanding of edges and corners without shoulders. The heart of the Flip Edger is the powerful motor with its enormous suction power and corresponding reserves. The unexpectedly handy weight of the Lagler Flip is due to the abrasion proof, glass fibre reinforced plastic used in the motor casing, handle and attachment. Like all Lagler Sanders, the Flip Edger has been designed down to the last detail with ergonomics, simple handling and maintenance in mind. The Flip Edge Sander has the "wood dust test" quality mark, making it the only edge and corner sanding machine in the world to work almost dust-free. There are 2 attachment lengths and 1 corner attachment available.
Universal motor with no-voltage release and thermal overload protection: 110 V / 60 CPS / 1.35 kW
Fuse protection min.: 20 Amperes
Sanding disc diameter : 5 7/8"
Sanding disc diameter corner attachment: 2 3/8"
Sanding disc speed under load: 3100 RPM
Sanding disc speed corner attachment under load: 7750 rpm
Attachment length, short: 6 1/8"
Attachment length, long: 12 3/8"
Length of corner attachment: 8 7/8"
Machine weight: 21.6 lbs.
Alto Supper 7R
The Super 7R is a powerful, versatile, and easy to use wood floor edging machine that has earned its reputation as an industry leader. With a new dust pipe design, a quick release dust bag, and the ability to attach directly to a vacuum, this edger continues to outpace the competition.
Hardened steel pinion with brass drive gear reduces vibration
Precision-balanced sanding pad produces finer finish
Powerful 1 hp motor maintains speed under the heaviest cutting conditions
Rotating dust pipe swivels 210 degrees to allow access to tight spaces
Quick release dust bag that slides on and off with a simple twist and pull
Easily attached to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment
Engineered for performance, convenience and durability, the Bona Edge XL is unequaled in power, balance, and dust pick-up. For open walls, accessing toe-kicks, stairs, and other hard to reach places. "Easy grip" handles rotate 270 degrees for ease of operation. DCS compatible (Atomic and portable DCS).GREENGUARD certified for indoor air quality.
Motor (single phase): 60 Hz, 115 Volt
Rated Power: 1.8 HP
Total Weight: 32 lbs.
Sanding disc size: 7"
Sanding disc speed: 3,000 RPM at normal load
Stair jig & extender
There is simply no quicker or easier way to scribe treads and risers than with our Stair Jig. Adjusts easily without tools from 32" to 52" for a perfect fit every time. For lengths 52" to 72", just add an Extender. Keep adding 20" Extenders to span any length tread. All joints lock tightly for dead-solid accuracy. The T-bar angle adjusts to greater than 45 degrees. And you'll appreciate its lightweight, all-metal construction.
The POWERJACK® Model 100 and Model 200 flooring jacks are quality tools designed for the professional flooring installer.
PowerJacks are designed to pull or push tongue & groove flooring strips into place and hold them tightly for hands-free nailing. Powerjacks will work on almost any thickness flooring without damaging the flooring surface. They can be used next to the wall, at stud locations or anywhere else on the floor.
• Speeds up installation & saves time
• Eliminates using pry bars or crowbars
• Provides needed leverage in tight spots
• Helps build a better floor
• Makes your job easier
• Works great for under-cabinet installations